Correct installation and operation method of CNC engraving and milling machine

Requirements for installation environment of CNC engraving and Milling machine:

1. The CNC engraving and Milling machine should be kept away from environments with dust, liquid splashes, and corrosive gases.

2. Avoid direct sunlight and have good lighting equipment indoors.

3. The foundation is solid and sturdy, with a smooth surface, and the CNC engraving and Milling machine does not cause vibration during normal operation.

4. The environment should be well ventilated, with a temperature range of 0-35 ℃ and a relative humidity of less than 75%.

5. There is a reliable grounding wire in the factory building, and a three pole socket with a grounding electrode is used. The grounding electrode must be in good contact with the ground. Generally, it is required that the grounding resistance be less than 10 Ω.

After installation, it's time to use the CNC engraving and milling machine. As a newcomer, are you unsure about the correct usage of the CNC engraving and milling machine? Today, the editor has prepared the correct operation method for the CNC engraving and milling machine for everyone:

1. Check the temperature and quantity of coolant in the coolant box of the CNC engraving and milling machine. Once the quantity is insufficient, it needs to be added in a timely manner. In addition, it is necessary to ensure that the coolant is not frozen and can circulate normally.

2. When installing a card knife, people need to insert the handle deep into the relevant card head, with a length generally exceeding 18 millimeters, otherwise it is easy to loosen. In addition, before installing the card cutter, people need to carefully check whether there is dirt inside the card head. If there is dirt, it needs to be cleaned properly to ensure that the installation is secure and not prone to problems.

3. Generally, the materials used for card installation need to be firmly fixed and not easily shaken, otherwise it is easy to cause various degrees of accidents. It is prohibited to carve and mill in places where the materials are suspended.

4. When processing, people use metal materials, so it is necessary to use cutting tools to reduce tool wear.

5. In the process of carving and milling, people should prohibit close observation of the cutting surface, otherwise it is easy for cutting debris to enter the eyes, causing unnecessary safety issues. When observing, people usually need to turn off the CNC engraving and milling machine to ensure that it is no longer in motion.